With this Gadget you can select\nthe PlayTyp\nPlay actual File: Plays the selected\n\n File in the List\nLoop actual File: Plays the selected\n File in the List for\n only 5 times\nPlay whole List: Plays all Files in the\n List only once\nRandom Play: Plays the whole list but\n in random order\nLoop whole List: Plays all Files in the\n List for only 5 times\nSleep Function: Plays the whole List a\n given time
STRING0232 (59//)
This List shows you all available Files.\nA doubleclick on an entry will popup a\nspecial window. With it you can depack\nany MpegFile or start playing at another\nposition.You can also drag a Entry with Mouse to\nanother Position in the List. But\nremember, when you enable the\nMultiSelection, you can't drag anymore\nany entry to another Position. When you\nenabled the MultiSelection, you can\nselect one ore more Entries you can play\nthem also instead of only one
STRING0236 (60//)
With this Gadget you can add a MpegFile\nto the List
STRING0240 (61//)
With this Gadget you can remove a\nMpegFile from the List
Depacking in Progress!\n\n**** Please Wait! ****\n
STRING0524 (132//)
Maximum Frequency
STRING0528 (133//)
Loop all Files
STRING0536 (135//)
Auto Filter
STRING0540 (136//)
Filter off
STRING0544 (137//)
Filter on
STRING0552 (139//)
Start at (in Seconds)
STRING0560 (141//)
Couldn't find File!
STRING0564 (142//)
Encoding in Progress!\n\n**** Please Wait! ****\n
STRING0568 (143//)
Do you really want to decode the File:
STRING0572 (144//)
I've finished!
STRING588 (148//)
Encoding Output
STRING0600 (151//)
Select an AudioMode
STRING0604 (152//)
AllocAudioRequestA() Failed!
STRING0608 (153//)
Couldn't open AHI.Device!
STRING0612 (154//)
Couldn't create IORequest!
STRING0624 (157//)
Couldn't open Timer.Device!
STRING0628 (158//)
Couldn't open TimerPort!
STRING0632 (159//)
Time to play: %ld Secs
STRING0636 (160//)
Played: %ld %%
STRING0640 (161//)
Couldn't open File!
STRING0644 (162//)
DosPattern
STRING0648 (163//)
Select an OutputFile
STRING0656 (165//)
Couldn't open Datatypes.Library!
STRING0664 (167//)
Couldn't open Muimaster.library
STRING0692 (174//)
Decode in Stereo
STRING0696 (175//)
Decode in Mono
STRING0716 (180//)
Z*Config Mui
STRING0748 (188//)
Play in Stereo
STRING0752 (189//)
Play in Mono
STRING0756 (190//)
Play to AudioOutput
STRING0760 (191//)
No Audio (Silence)
STRING0784 (197//)
MpegA
STRING0788 (198//)
Gui
STRING0792 (199//)
Misc
STRING0796 (//)
Couldn't open Output
STRING0800 (//)
Close List when Playing
STRING0804 (//)
Enbable MultiSelect
STRING0808 (//)
Save Prefs
STRING0816 (205//)
MpegA Executable
STRING0820 (//)
Mpeg-Files Directory
STRING0824 (//)
This Gadget changes the Volume
STRING0828 (//)
Here you can change the max decoding\nFrequency
STRING0832 (//)
This one changes input file buffer Size
STRING0836 (//)
Changes the Frequency Divison
STRING0840 (//)
Here you can change the output Quality.\nWorst is pretty bad Quality, where very\ngood is really good quality but also\n very cpu intensive
STRING0844 (//)
Here you can change the status of the\nAudioFilter. When this Gadgets stand on\nAuto Filter, MpegA itself will handle\n the AudioFilter..
STRING0848 (//)
If you use the Ahi.Device, you can enter\na valid OutputValue. Or just click on\nthe PopUpGadget to open the\n Ahi-Modes-Requester
STRING0852 (//)
Play the MpegFile in Stereo or Mono?
STRING0856 (//)
Wait for the AudioBuffer?
STRING0860 (//)
Use Asynchronous I/O for InputFiles?
STRING0864 (//)
Saves the current settings into the\nENVARC: and ENV: Drawer
STRING0868 (//)
Saves the current settings only to the\nENV: Drawer
STRING0872 (//)
Goes back to the MainWindow
STRING0876 (//)
When this Gadget is selected, the List\nwith the MpegFiles will close, when you\nstart playing
STRING0880 (//)
When this Gadget is selected, you can\nselect more than only one Song in the\nList. So you can play your favourite\nSongs. Even when you selected the 'Play\n selected File' or 'Loop actual File'\n mode
STRING0884 (//)
When you quit MpegA, you can select with\nthis gadget, that MpegA will also stops\nplaying
STRING0888 (//)
Save Prefs when Quitting MpegA-Gui?
STRING0892 (//)
This value sets MpegA to the given\nTaskPriority.
STRING0896 (//)
Here you can enter, what the\nFileRequester will show or filter when\nyou want to select more or new Mpeg\nFiles.
STRING0900 (//)
Here you can enter the MpegA executable\nitselft
STRING0904 (//)
Here you can enter the Path, where you\nstored your Mpeg-Files
STRING0908 (//)
Here you can set the numbers of loops.\nWhen you select 'Loop actual File' you\ncan enter here, how many times the Loop\nwill be
STRING0912 (//)
Where shall I begin?
STRING0916 (//)
When you enter here a File name, ONLY\nTHEN MpegA will depack a Mpeg file to\nthe entered Filename inclusive drawer
STRING0920 (//)
Here you can selected the Filetyp\nbetween AIFF or WAV.
STRING0924 (//)
Depack in Stereo or Mono?
STRING0928 (//)
Listen to it while depacking? Note:\nWhen you depack, you should depack with\nthe best mode and disable the\nAudioOutput.
STRING0932 (//)
Here you can enter the maximum\n'Decoding'-'Depacking'-Frequency
STRING0936 (//)
Here you can start play or decrunch
STRING0940 (//)
When you want to listen only 5 Minutes\nto the Mpeg-Files, just set the slider\nto 5
STRING0944 (237//)
Here you can start the playing
STRING0948 (238//)
DestinationFile
STRING0952 (239//)
Bitrate
STRING0956 (240//)
Frequency
STRING0960 (241//)
Layer
STRING0968 (243//)
Mode
STRING0972 (244//)
Stereo
STRING0976 (245//)
Mono
STRING0980 (246//)
Model
STRING0984 (247//)
Psychoacoustic Model 1
STRING0988 (248//)
Psychoacoustic Model 2
STRING0992 (249//)
De-Emphasis
STRING0996 (250//)
None
STRING1000 (251//)
50/15 ms
STRING1004 (252//)
CCITT J.17
STRING1008 (253//)
Original
STRING1012 (254//)
Error Protection
STRING1016 (255//)
Private
STRING1020 (256//)
Copyrighted
STRING1024 (257//)
Start Endcoding
STRING1028 (258//)
Cancel
STRING1044 (262//)
Joint Stereo
STRING1048 (263//)
Dual Channel
STRING1052 (264//)
Encoding Executable
STRING1064 (267//)
K*Encoder-Window
STRING1072 (269//)
Add SourceFiles
STRING1076 (270//)
Select one or more uncoded AIFF or PCM Files
STRING1080 (271//)
Remove Entry
STRING1084 (272//)
This List contents all Files, which will\nencoded
STRING1088 (273//)
Here you can add Files, which you want\nto encode. Note, that MusicIn and\nMp3enc can only handle AIFF- or\nPCM-SoundFiles
STRING1092 (//)
Here you can remove Files from the List
STRING1096 (//)
In this Gadget you can change the\nDestinationName and Path of the current\nFilename
STRING1100 (//)
Here you can select the Bitrate. 32Kbps\nis the biggest compression were 384Kbps\nthe lowest is
STRING1104 (//)
With this Gadget you can select the\nFrequency. Note, for AIFF you don't\nneed to change or set this Gadget
STRING1108 (//)
Here you can set the Layer. Layer 1 is\nMpeg1, Layer 2 is Mpeg2. Mpeg3 is not\nsupported yet
STRING1112 (//)
Here you can select the EncodeMode.\nAvailable are, Stereo, Mono, Joint\nStereo and Dual Channel. With a mono\nsample I recommend you to choose a total\nbitrate of 64, 72 or 80 kbps. With a\nstereo sample use more that 96 kbps.\nThe total bitrate must be a multiple of 16
STRING1116 (//)
Here you can select the Psychoacoustic\nModel
STRING1120 (//)
Here you can enter a File or a Window\nwhere the Output has to write to
STRING1124 (//)
Enter here the type of deemphasing
STRING1128 (//)
Is the SourceFile the original?
STRING1132 (//)
Set Error Protection Bit?
STRING1136 (//)
Set PrivateBit for the SourceFile?
STRING1140 (//)
Is this File copyrighted?
STRING1144 (//)
This Button starts the encodingprocess
STRING1148 (//)
Here you can enter the Executable of\na encodingprogram
STRING1152 (//)
This String appears in the FileRequester\nwhich adds SourceFiles to the List
STRING1156 (//)
TimerWindow
STRING1160 (//)
Enter here the number of minutes to\nplay. After that time, MpegA-Gui will\nstop playing... (Sleep well)!
STRING1164 (292//)
I*Iconify
STRING1172 (294//)
Playlist at Start
STRING1176 (//)
This Gadget contains the\nList, which will loaded when\nMpegA is starting up
STRING1180 (//)
Select a Playlist for StartUp
STRING1184 (//)
Show VolumeGadget in MainWindow
STRING1188 (//)
When this Gadget is active a\nVolumeGadget will appear in the\nMainWindow. So you can specify\ndirectly the Volume